Malt Extract Agar (MEA) Plates
Ready-to-use 90 mm malt extract agar plates for cultivating yeasts and moulds, maintaining fungal cultures and mycology work.
What Grows
Intended Use
Ready-to-use 90 mm malt extract agar plates for the cultivation, isolation and maintenance of yeasts and moulds from food, beverage, environmental and mycological samples.
For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.
Principle
Malt extract is the whole nutrient base. It supplies maltose and other sugars as the carbon source, along with amino acids, B vitamins and minerals carried over from the germinated barley it is made from. Mycological peptone adds nitrogen in a form fungi use readily.
That composition is close to what many fungi encounter in nature, which is why malt extract agar is the traditional medium for growing mycelium rather than just detecting it. Colonies are dense, grow quickly and transfer cleanly.
The medium is adjusted to pH 5.4. The mildly acidic pH suits fungi and discourages many bacteria, giving a degree of selectivity by formulation alone with no antibiotic in the medium.
Formulation (g/L)
| Component | g/L |
|---|---|
| Malt extract | 30.00 |
| Agar | 15.00 |
| Mycological peptone | 5.00 |
| Total | 50.00 |
Final pH 5.4 ± 0.2 at 25 °C. Formulation may be adjusted to meet performance specifications.
Key Applications
Reading the Results
| Organism group | Typical appearance |
|---|---|
| Yeasts | Cream to white, smooth, pasty, convex colonies, usually 1–3 mm |
| Moulds | Dense, fast-spreading mycelium with aerial growth; colour varies by genus as spores develop |
| Bacteria | Reduced but not excluded; acid-tolerant species may form small colonies |
Count yeast and mould colonies separately where your method requires it. Report as CFU per mL or CFU per g of sample, using the dilution factor, or as CFU per plate for settle plates.
Advantages & Considerations
- Ready to use: no weighing, autoclaving or pouring
- Dense, vigorous mycelial growth, so cultures transfer cleanly
- Acidic pH suppresses many bacteria without an antibiotic in the medium
- Long-established mycological medium, familiar to most analysts
- Suits both enumeration work and culture maintenance
- Not a selective medium. Acid-tolerant bacteria can grow and may interfere with counting.
- Vigorous mycelial growth is an advantage for culture work and a problem for counting; a fast mould can cover a plate in two to three days.
- Pour-plate counts are not possible with a pre-poured plate. Use surface spread or streak inoculation.
- ISO 21527-1 and ISO 21527-2 specify dichloran rose bengal chloramphenicol agar and dichloran 18% glycerol agar for yeast and mould enumeration in foods. Where you work to an ISO method, use the medium that method names.
Related Standards (for user reference)
- FDA Bacteriological Analytical Manual, Chapter 18 — Yeasts, Moulds and Mycotoxins
- APHA Compendium of Methods for the Microbiological Examination of Foods — fungal enumeration chapters
Frequently Asked Questions
How is Malt Extract Agar different from Potato Dextrose Agar?
Both are general-purpose mycological media at an acidic pH. Malt extract agar uses malt extract as its base, which is high in maltose, and is the traditional choice for mycelial growth, culture maintenance and mushroom work. Potato dextrose agar uses potato infusion and dextrose and is often preferred for sporulation and pigment production.
Can I do a pour-plate count with these plates?
No. A pour-plate count requires mixing the sample into molten agar, which is not possible with a plate that has already set. Use surface spread or streak inoculation, or use the dehydrated medium if your method specifies a pour plate.
Does the medium contain an antibiotic?
No. Selectivity comes from the acidic pH alone, so acid-tolerant bacteria can still grow. For samples with a heavy bacterial load, use YGC Agar plates (AS-702), which contain chloramphenicol.
How long should I incubate?
Commonly 3 to 5 days at 25 °C, extended to 7 days where slow-growing fungi are expected. Examine the plates each day, since a fast mould can overgrow the plate before the end of a longer incubation.
Can I use these for mushroom culture work?
Yes. Malt extract agar is a standard medium for spore germination, isolating a strain from a wild specimen and maintaining stock cultures. For work where bacterial contamination carried in on spores is the main problem, a medium containing an antibacterial agent gives cleaner results.
Technical Specifications
| Catalogue No. | AS-703 |
| Also known as | MEA; Malt Extract Agar; Malt Agar |
| Format | Ready-to-use poured plates, 90 mm, flat agar surface |
| Fill volume | 20 ± 1.5 mL per plate |
| Pack size | 10 plates per sleeve (as stated on label) |
| Storage | 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze. |
| Shipping conditions | Chilled, insulated carton with coolant packs; plates separated from the coolant |
| Dispatch | Mondays, to avoid weekend transit |
| Shelf life | 6 weeks from date of manufacture; expiry stated on label |
| pH (25 °C) | 5.4 ± 0.2 |
| Appearance | Amber, clear to slightly opalescent gel |
| Incubation | 25 °C, 3–5 days (up to 7 days if your procedure requires), aerobic |
| Documents | TDS, SDS; batch COA on request |
How to Use
- Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
- If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
- Spread plate: pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
- Streak or point inoculation: transfer with a sterile loop or scalpel for isolation and culture work.
- Settle plate: expose the open plate for the period your procedure specifies.
- Incubate inverted. Examine daily and count yeast and mould colonies.
On Arrival
Refrigerate on arrival. Check the sleeve for cracked, dried or contaminated plates and tell us within seven days if any are affected.
Plates are packed so they never touch the coolant, because contact freezes the gel and ruins the plate. If a carton arrives warm, refrigerate it and contact us before use.
Storage & Disposal
Store at 2–8 °C in the dark, in the original sleeve, agar side up with the lid down. Do not freeze; freezing ruptures the gel and the plate cannot be used. Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.
Related Products
Potato Dextrose Agar Plates (AS-700) for sporulation and pigment work.
YGC Agar Plates (AS-702) for yeast and mould counts with bacteria suppressed.
Technical Data Sheet — Malt Extract Agar (MEA) Plates
TDS-AS-703 · Rev 1.0 · November 2026Ready-to-use 90 mm malt extract agar plates for the cultivation, isolation and maintenance of yeasts and moulds from food, beverage, environmental and mycological samples. For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.
Malt extract supplies maltose and other sugars as the carbon source, together with amino acids, B vitamins and minerals carried over from germinated barley. Mycological peptone adds nitrogen in a readily used form. The pH of 5.4 suits yeasts and moulds while discouraging many bacteria, giving selectivity by formulation rather than by antibiotic. The nutrient balance favours dense mycelial growth, which makes the medium well suited to culture maintenance and transfer as well as enumeration.
| Component | g/L |
|---|---|
| Malt extract | 30.00 |
| Agar | 15.00 |
| Mycological peptone | 5.00 |
| Total | 50.00 |
| Format | Ready-to-use poured plates, 90 mm, flat agar surface |
| Fill volume | 20 ± 1.5 mL per plate |
| Pack size | 10 plates per sleeve (as stated on label) |
| Storage | 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze. |
| Shipping conditions | Chilled, insulated carton with coolant packs; plates separated from the coolant |
| Dispatch | Mondays, to avoid weekend transit |
| Shelf life | 6 weeks from date of manufacture; expiry stated on label |
| pH (25 °C) | 5.4 ± 0.2 |
| Appearance | Amber, clear to slightly opalescent gel |
- Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
- If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
- Spread plate: pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
- Streak or point inoculation: transfer with a sterile loop or scalpel for isolation and culture work.
- Settle plate: expose the open plate for the period your procedure specifies.
- Incubate inverted. Examine daily and count yeast and mould colonies.
Incubation: 25 °C, 3–5 days (up to 7 days if your procedure requires), aerobic.
| Organism group | Typical appearance |
|---|---|
| Yeasts | Cream to white, smooth, pasty, convex colonies, usually 1–3 mm |
| Moulds | Dense, fast-spreading mycelium with aerial growth; colour varies by genus as spores develop |
| Bacteria | Reduced but not excluded; acid-tolerant species may form small colonies |
Report as CFU per mL or CFU per g using the dilution factor, or as CFU per plate for settle plates. Growth does not identify an organism; confirm isolates by microscopy, subculture or sequencing as appropriate.
| Organism | Strain | Inoculum (CFU) | Growth | Appearance |
|---|---|---|---|---|
| Saccharomyces cerevisiae | ATCC 9763 | ≤100 | Good growth | Cream, pasty colonies |
| Candida albicans | ATCC 10231 | ≤100 | Good growth | Cream, smooth colonies |
| Aspergillus brasiliensis | ATCC 16404 | ≤100 | Good growth | Dense mycelium with sporulation |
| Escherichia coli | ATCC 25922 | 10⁴–10⁶ | Reduced to no growth | Small colonies, if any |
Aspergillus brasiliensis ATCC 16404 is the current name for the organism previously listed as Aspergillus niger. The ATCC number is unchanged.
- Not a selective medium. Acid-tolerant bacteria can grow and may interfere with counting.
- Vigorous mycelial growth suits culture work but complicates counting; a fast mould can cover a plate in two to three days.
- Pour-plate counts are not possible with a pre-poured plate. Where your method specifies a pour-plate technique, use the dehydrated medium instead.
- Supplements cannot be added to a set plate. Where antibiotic suppression of bacteria is required, use a medium supplied with the antibiotic incorporated.
- ISO 21527-1 and ISO 21527-2 specify dichloran rose bengal chloramphenicol agar and dichloran 18% glycerol agar for yeast and mould enumeration in foods, not malt extract agar.
- Colony morphology is suggestive, not confirmatory.
Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.
- Atlas R.M. (2010). Handbook of Microbiological Media, 4th ed. CRC Press.
- Pitt J.I., Hocking A.D. (2009). Fungi and Food Spoilage, 3rd ed. Springer.
- Samson R.A., Houbraken J., Thrane U., Frisvad J.C., Andersen B. (2010). Food and Indoor Fungi. CBS-KNAW Fungal Biodiversity Centre.
- US Food and Drug Administration. Bacteriological Analytical Manual, Chapter 18: Yeasts, Molds and Mycotoxins.
- Salfinger Y., Tortorello M.L., eds. (2015). Compendium of Methods for the Microbiological Examination of Foods, 5th ed. APHA.
Safety Data Summary — Malt Extract Agar (MEA) Plates
SDS-AS-703 · Rev 1.0 · November 2026 · Full 16-section SDS available on requestNot classified as hazardous according to the criteria of the GHS (Rev. 7) as adopted under the Australian WHS Regulations. No hazard pictogram or signal word is required for unused plates.
Contains malt extract, which is derived from barley and contains gluten. People with coeliac disease or gluten sensitivity should avoid exposure.
Used plates may contain viable yeasts, moulds and bacteria recovered from the sample. Fungal cultures release spores when the lid is lifted; open incubated plates in a biological safety cabinet where the sample history or the laboratory's risk assessment warrants it. Handle and dispose of used plates as biological waste.
- Use good laboratory practice. Open plates only at the time of inoculation or reading.
- Wear laboratory coat and gloves; safety glasses per laboratory policy.
- Do not sniff or inhale over incubated fungal plates.
- Skin: Wash with soap and water.
- Eyes: Rinse with water for several minutes.
- Ingestion: Rinse mouth. Seek medical advice if you feel unwell.
- Used plates: After contact, wash thoroughly and follow your laboratory biosafety procedure.
Poisons Information Centre (Australia): 13 11 26 · Emergency: 000
Store at 2–8 °C in the dark, agar side up. Do not freeze. Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.
Unused plates are not dangerous goods. Transport chilled at 2–8 °C in an insulated carton.
Quality & Certificate of Analysis
AS-703 · Batch-specific COA available on requestEach batch is manufactured in Melbourne and tested before release. A batch-specific Certificate of Analysis is available on request. Please quote the batch number printed on the sleeve.
| Test | Specification |
|---|---|
| Appearance | Amber, clear to slightly opalescent gel, free of contamination and damage |
| Fill volume | 20 ± 1.5 mL per plate |
| pH (25 °C) | 5.4 ± 0.2 |
| Sterility | No growth after 48 h at 30–35 °C and 72 h at 20–25 °C (representative plates) |
| Growth performance | Saccharomyces cerevisiae ATCC 9763, Candida albicans ATCC 10231 and Aspergillus brasiliensis ATCC 16404: good growth at ≤100 CFU |
| Partial selectivity | Escherichia coli ATCC 25922: reduced to no growth |