AS-705

Nutrient Agar Plates, 90 mm Ready-to-Use

$15.00 USD
Pack
Request a Quote
Ready-to-use Plates · General Purpose Medium

Nutrient Agar Plates

Ready-to-use 90 mm nutrient agar plates for routine cultivation and enumeration of non-fastidious bacteria in food, water, environmental and teaching laboratories.

Cat. No. AS-70590 mm · 20 mLpH 7.4 ± 0.2Ready to useGeneral purpose
No preparation needed: plates are poured, sealed and ready to use. Inoculate, incubate and count.

What Grows

Non-fastidious bacteriaGood growth
Fastidious speciesLimited
Selective agentNone
Incubation35–37 °C, 18–24 h

Intended Use

Ready-to-use 90 mm nutrient agar plates for the routine cultivation, subculture and enumeration of non-fastidious bacteria from food, water, environmental and teaching laboratory samples.

For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

Principle

Nutrient agar is the oldest and simplest of the general-purpose media, and that simplicity is the point. Meat extract supplies the water-soluble residues of muscle tissue, including amino acids, peptides, nucleotides, organic acids and minerals. Peptone adds nitrogen as peptides and amino acids, and yeast extract contributes B vitamins and further growth factors.

Sodium chloride maintains osmotic balance, and agar sets the gel. There is no selective agent, no indicator and no added carbohydrate.

The result is a medium that grows most bacteria you will meet in routine work without favouring any of them, which makes it the standard choice for teaching, for keeping working stocks and for routine counts where the question is simply how many organisms are present.

Formulation (g/L)

Component g/L
Agar 15.00
Peptone 5.00
Sodium chloride 5.00
Yeast extract 2.00
Meat extract 1.00
Total 28.00

Final pH 7.4 ± 0.2 at 25 °C. Formulation may be adjusted to meet performance specifications.

Key Applications

TeachingIntroductory microbiology practicals, streak plates and aseptic technique.
Culture MaintenanceWorking stocks, subculture and purity checks of routine strains.
Water TestingGeneral bacterial cultivation from water and environmental samples.
Food & BeverageRoutine bacterial cultivation in hygiene and quality programs.
EnvironmentalSettle-plate exposure for airborne bacterial load.
Colony MorphologyPigment and colony-form observation on an unmodified base.

Reading the Results

Organism group Typical appearance
Most non-fastidious bacteria Opaque cream to white colonies, 1–3 mm; some species pigmented
Serratia, Micrococcus, Pseudomonas Pigment often clearly visible on this unmodified base
Yeasts and moulds May grow on extended incubation

Count all colonies and report as CFU per mL or CFU per g using the dilution factor, or as CFU per plate for settle plates. The medium gives no differential reaction, so colony appearance indicates the type of organism but does not identify it.

Advantages & Considerations

Advantages
  • Ready to use: no weighing, autoclaving or pouring
  • Grows most routine bacteria without favouring any of them
  • Unmodified base, so pigment and colony form show clearly
  • The most economical general-purpose plate for teaching and routine work
Considerations
  • Entirely non-selective. Every organism present will grow, so a mixed sample gives a mixed plate.
  • Lighter than Tryptic Soy Agar, so fastidious organisms may grow poorly or not at all.
  • Pour-plate counts are not possible with a pre-poured plate. Use surface spread or streak inoculation.
  • Standard plate count methods for food and water generally specify Plate Count Agar, which is a different formulation. Check what your method names before substituting.

Related Standards (for user reference)

  • APHA Compendium of Methods for the Microbiological Examination of Foods — general cultivation chapters
  • APHA Standard Methods for the Examination of Water and Wastewater — heterotrophic plate count chapters

Frequently Asked Questions

What is the difference between Nutrient Agar and Tryptic Soy Agar?
Nutrient agar is a lighter general-purpose medium built on meat extract and peptone. Tryptic soy agar is richer, using casein and soy digests, and supports a wider range of organisms including some fastidious species. Use nutrient agar for routine and teaching work, and tryptic soy agar where recovery must be as broad as possible.

Can I do a pour-plate count with these plates?
No. A pour-plate count requires mixing the sample into molten agar, which is not possible with a plate that has already set. Use surface spread or streak inoculation, or use the dehydrated medium if your method specifies a pour plate.

Is Nutrient Agar suitable for a standard plate count?
Check which medium your method names. Standard plate count methods for food and water generally specify Plate Count Agar, also called Standard Methods Agar, which has a different formulation. Nutrient agar is a general-purpose cultivation medium rather than a standard enumeration medium.

Can I use these plates for fungi?
Yeasts and moulds will grow on extended incubation, but the near-neutral pH and bacterial-oriented nutrients make it a poor choice for fungal work. Use Malt Extract Agar plates (AS-703) or Potato Dextrose Agar plates (AS-700) instead.

Why do some suppliers list a different formulation?
Two versions of nutrient agar are in common use. One is built on meat extract with yeast extract and sodium chloride, as supplied here; the other is a simpler meat extract and peptone base without them. Both are called nutrient agar and both grow the same routine organisms, but the composition and usage rate differ, so match the formulation to your own method or SOP.

Technical Data Sheet — Nutrient Agar Plates

TDS-AS-705 · Rev 1.0 · November 2026
1. Intended Use

Ready-to-use 90 mm nutrient agar plates for the routine cultivation, subculture and enumeration of non-fastidious bacteria from food, water, environmental and teaching laboratory samples. For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

2. Mode of Action

Meat extract supplies amino acids, peptides, nucleotides, organic acids and minerals. Peptone provides nitrogen as peptides and amino acids, and yeast extract contributes B vitamins and further growth factors. Sodium chloride maintains osmotic balance and agar sets the gel. The medium contains no selective agent, no indicator and no added carbohydrate, so it supports most non-fastidious bacteria without favouring any particular group.

3. Formulation (g/L)
Component g/L
Agar 15.00
Peptone 5.00
Sodium chloride 5.00
Yeast extract 2.00
Meat extract 1.00
Total 28.00
4. Product Specifications
Format Ready-to-use poured plates, 90 mm, flat agar surface
Fill volume 20 ± 1.5 mL per plate
Pack size 10 plates per sleeve (as stated on label)
Storage 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze.
Shipping conditions Chilled, insulated carton with coolant packs; plates separated from the coolant
Dispatch Mondays, to avoid weekend transit
Shelf life 6 weeks from date of manufacture; expiry stated on label
pH (25 °C) 7.4 ± 0.2
Appearance Light amber, clear to slightly opalescent gel
5. Directions for Use
  1. Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
  2. If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
  3. Spread plate: pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
  4. Streak plate: inoculate with a sterile loop for isolation or purity checking.
  5. Settle plate: expose the open plate for the period your procedure specifies.
  6. Incubate inverted, then count all colonies.

Incubation: 35–37 °C, 18–24 hours (up to 48 hours if your procedure requires), aerobic. Lower temperatures and longer incubation are used for environmental and water work.

6. Interpretation
Organism group Typical appearance
Most non-fastidious bacteria Opaque cream to white colonies, 1–3 mm; some species pigmented
Serratia, Micrococcus, Pseudomonas Pigment often clearly visible on this unmodified base
Yeasts and moulds May grow on extended incubation

Report as CFU per mL or CFU per g using the dilution factor, or as CFU per plate for settle plates. The medium gives no differential reaction; identify isolates by subculture and appropriate confirmatory testing.

7. Quality Control
Organism Strain Inoculum (CFU) Growth
Escherichia coli ATCC 25922 ≤100 Good growth
Staphylococcus aureus ATCC 25923 ≤100 Good growth
Pseudomonas aeruginosa ATCC 27853 ≤100 Good growth
Bacillus subtilis ATCC 6633 ≤100 Good growth
8. Limitations
  • Entirely non-selective. Every organism present will grow, so a single organism cannot be isolated from a mixed sample without a selective medium.
  • Lighter than Tryptic Soy Agar. Fastidious organisms, including streptococci and many clinically significant species, may grow poorly or not at all.
  • Pour-plate counts are not possible with a pre-poured plate. Where your method specifies a pour-plate technique, use the dehydrated medium instead.
  • Standard plate count methods for food and water generally specify Plate Count Agar, which is a different formulation.
  • Not suitable for strict anaerobes without an anaerobic incubation system.
  • Growth does not identify an organism.
9. Disposal

Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.

10. References
  1. Atlas R.M. (2010). Handbook of Microbiological Media, 4th ed. CRC Press.
  2. Difco & BBL Manual: Manual of Microbiological Culture Media, 2nd ed. (2009). BD Diagnostics.
  3. Salfinger Y., Tortorello M.L., eds. (2015). Compendium of Methods for the Microbiological Examination of Foods, 5th ed. APHA.
  4. Baird R.B., Eaton A.D., Rice E.W., eds. (2017). Standard Methods for the Examination of Water and Wastewater, 23rd ed. APHA/AWWA/WEF.
  5. Bridson E.Y. (2006). The Oxoid Manual, 9th ed. Oxoid Limited.

Safety Data Summary — Nutrient Agar Plates

SDS-AS-705 · Rev 1.0 · November 2026 · Full 16-section SDS available on request
Hazard Classification

Not classified as hazardous according to the criteria of the GHS (Rev. 7) as adopted under the Australian WHS Regulations. No hazard pictogram or signal word is required for unused plates.

Contains material of animal origin (meat extract). This may be relevant where your procedures restrict animal-derived components.

Biosafety

Because the medium is non-selective, used plates may carry a higher and more varied microbial load than a selective medium would, including organisms not anticipated when the sample was taken. Treat incubated plates as potentially infectious, open them in a biological safety cabinet where the laboratory's risk assessment requires it, and dispose of them as biological waste.

Handling & Protection
  • Use good laboratory practice. Open plates only at the time of inoculation or reading.
  • Wear laboratory coat and gloves; safety glasses per laboratory policy.
First Aid
  • Skin: Wash with soap and water.
  • Eyes: Rinse with water for several minutes.
  • Ingestion: Rinse mouth. Seek medical advice if you feel unwell.
  • Used plates: After contact, wash thoroughly and follow your laboratory biosafety procedure.

Poisons Information Centre (Australia): 13 11 26 · Emergency: 000

Storage & Disposal

Store at 2–8 °C in the dark, agar side up. Do not freeze. Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.

Transport

Unused plates are not dangerous goods. Transport chilled at 2–8 °C in an insulated carton.

Quality & Certificate of Analysis

AS-705 · Batch-specific COA available on request

Each batch is manufactured in Melbourne and tested before release. A batch-specific Certificate of Analysis is available on request. Please quote the batch number printed on the sleeve.

Release Specifications
Test Specification
Appearance Light amber, clear to slightly opalescent gel, free of contamination and damage
Fill volume 20 ± 1.5 mL per plate
pH (25 °C) 7.4 ± 0.2
Sterility No growth after 48 h at 30–35 °C and 72 h at 20–25 °C (representative plates)
Growth performance Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853 and Bacillus subtilis ATCC 6633: good growth at ≤100 CFU

CUSTOMERS ALSO BOUGHT