Potato Dextrose Agar Plates
Ready-to-use 90 mm potato dextrose agar plates for cultivating and enumerating yeasts and moulds in food, environmental and plant pathology work.
What Grows
Intended Use
Ready-to-use 90 mm potato dextrose agar plates for the cultivation, isolation and enumeration of yeasts and moulds from food, beverage, environmental and plant material samples.
For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.
Principle
Potato infusion supplies starch, dextrins, minerals and the trace nutrients that filamentous fungi grow best on. Dextrose at 20 g/L is the carbon and energy source, and the high sugar concentration favours fungi over most bacteria.
The medium is adjusted to pH 5.6. That mildly acidic pH suits yeasts and moulds, which tolerate it comfortably, while discouraging many bacteria whose growth range does not extend that low. The result is a degree of selectivity achieved by formulation alone, with no antibiotic in the medium.
The nutrient balance also supports sporulation and pigment production, so colony appearance on this medium carries useful identification information rather than just indicating growth.
Formulation (g/L)
| Component | g/L |
|---|---|
| Dextrose | 20.00 |
| Agar | 15.00 |
| Potato infusion solids | 4.00 |
| Total | 39.00 |
Final pH 5.6 ± 0.2 at 25 °C. Formulation may be adjusted to meet performance specifications.
Key Applications
Reading the Results
| Organism group | Typical appearance |
|---|---|
| Yeasts | Cream to white, smooth, pasty, convex colonies, usually 1–3 mm |
| Moulds | Filamentous, spreading, with aerial mycelium; colour varies by genus as spores develop |
| Bacteria | Reduced but not excluded; acid-tolerant species may form small colonies |
Count yeast and mould colonies separately where your method requires it. Report as CFU per mL or CFU per g of sample, using the dilution factor, or as CFU per plate for settle plates.
Advantages & Considerations
- Ready to use: no weighing, autoclaving or pouring
- Supports sporulation and pigment production, so colony morphology aids identification
- Acidic pH suppresses many bacteria without an antibiotic in the medium
- Long-established general-purpose mycological medium, familiar to most analysts
- Not a selective medium. Acid-tolerant bacteria can grow and may interfere with counting.
- Spreading moulds can cover a plate within a few days and obscure slower colonies. Read plates daily rather than only at the end point.
- Pour-plate counts are not possible with a pre-poured plate. Use surface spread or streak inoculation.
- ISO 21527-1 and ISO 21527-2 specify dichloran rose bengal chloramphenicol agar and dichloran 18% glycerol agar for yeast and mould enumeration in foods. Where you work to an ISO method, use the medium that method names.
Related Standards (for user reference)
- FDA Bacteriological Analytical Manual, Chapter 18 — Yeasts, Moulds and Mycotoxins
- APHA Compendium of Methods for the Microbiological Examination of Foods — fungal enumeration chapters
Frequently Asked Questions
Why is the pH 5.6 rather than neutral?
The mildly acidic pH suits yeasts and moulds and discourages many bacteria, so the medium gains a degree of selectivity without an antibiotic. It is not fully selective, and acid-tolerant bacteria can still grow.
Can I do a pour-plate count with these plates?
No. A pour-plate count requires mixing the sample into molten agar, which is not possible with a plate that has already set. Use surface spread or streak inoculation, or use the dehydrated medium if your method specifies a pour plate.
How is this different from Sabouraud Dextrose Agar?
Both are general-purpose mycological media with a high dextrose content and an acidic pH. Potato Dextrose Agar uses potato infusion as its nutrient base and is favoured for sporulation and pigment production, which makes colony morphology more useful for identification.
Can I add chloramphenicol to suppress bacteria?
Not to a poured plate; supplements must be added before the agar sets. For samples with a heavy bacterial load, use YGC Agar plates (AS-702), which contain chloramphenicol.
How long should I incubate?
Commonly 3 to 5 days at 20–25 °C, extended to 7 days where slow-growing fungi are expected. Examine the plates each day, since a fast mould can overgrow the plate before the end of a 7-day incubation.
Technical Specifications
| Catalogue No. | AS-700 |
| Format | Ready-to-use poured plates, 90 mm, flat agar surface |
| Fill volume | 20 ± 1.5 mL per plate |
| Pack size | 10 plates per sleeve (as stated on label) |
| Storage | 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze. |
| Shipping conditions | Chilled, insulated carton with coolant packs; plates separated from the coolant |
| Dispatch | Mondays, to avoid weekend transit |
| Shelf life | 6 weeks from date of manufacture; expiry stated on label |
| pH (25 °C) | 5.6 ± 0.2 |
| Appearance | Light amber, clear to slightly opalescent gel |
| Incubation | 20–25 °C, 3–5 days (up to 7 days if your procedure requires), aerobic |
| Documents | TDS, SDS; batch COA on request |
How to Use
- Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
- If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
- Spread plate: pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
- Streak plate: inoculate with a sterile loop for isolation.
- Settle plate: expose the open plate for the period your procedure specifies.
- Incubate inverted. Examine daily and count yeast and mould colonies.
On Arrival
Refrigerate on arrival. Check the sleeve for cracked, dried or contaminated plates and tell us within seven days if any are affected.
Plates are packed so they never touch the coolant, because contact freezes the gel and ruins the plate. If a carton arrives warm, refrigerate it and contact us before use.
Storage & Disposal
Store at 2–8 °C in the dark, in the original sleeve, agar side up with the lid down. Do not freeze; freezing ruptures the gel and the plate cannot be used. Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.
Related Products
YGC Agar Plates (AS-702) for yeast and mould counts where bacteria must be suppressed by antibiotic.
Tryptic Soy Agar Plates (AS-701) for total aerobic count.
Technical Data Sheet — Potato Dextrose Agar Plates
TDS-AS-700 · Rev 1.0 · November 2026Ready-to-use 90 mm potato dextrose agar plates for the cultivation, isolation and enumeration of yeasts and moulds from food, beverage, environmental and plant material samples. For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.
Potato infusion supplies starch, dextrins and minerals, and dextrose at 20 g/L is the carbon and energy source; the high sugar content favours fungi. The pH of 5.6 suits yeasts and moulds while discouraging many bacteria, giving selectivity by formulation rather than by antibiotic. The nutrient balance supports sporulation and pigment production, so colony morphology is informative.
| Component | g/L |
|---|---|
| Dextrose | 20.00 |
| Agar | 15.00 |
| Potato infusion solids | 4.00 |
| Total | 39.00 |
| Format | Ready-to-use poured plates, 90 mm, flat agar surface |
| Fill volume | 20 ± 1.5 mL per plate |
| Pack size | 10 plates per sleeve (as stated on label) |
| Storage | 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze. |
| Shipping conditions | Chilled, insulated carton with coolant packs; plates separated from the coolant |
| Dispatch | Mondays, to avoid weekend transit |
| Shelf life | 6 weeks from date of manufacture; expiry stated on label |
| pH (25 °C) | 5.6 ± 0.2 |
| Appearance | Light amber, clear to slightly opalescent gel |
- Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
- If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
- Spread plate: pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
- Streak plate: inoculate with a sterile loop for isolation.
- Settle plate: expose the open plate for the period your procedure specifies.
- Incubate inverted. Examine daily and count yeast and mould colonies.
Incubation: 20–25 °C, 3–5 days (up to 7 days if your procedure requires), aerobic.
| Organism group | Typical appearance |
|---|---|
| Yeasts | Cream to white, smooth, pasty, convex colonies, usually 1–3 mm |
| Moulds | Filamentous, spreading, with aerial mycelium; colour varies by genus as spores develop |
| Bacteria | Reduced but not excluded; acid-tolerant species may form small colonies |
Report as CFU per mL or CFU per g using the dilution factor, or as CFU per plate for settle plates. Growth does not identify an organism; confirm isolates by microscopy, subculture or sequencing as appropriate.
| Organism | Strain | Inoculum (CFU) | Growth | Appearance |
|---|---|---|---|---|
| Saccharomyces cerevisiae | ATCC 9763 | ≤100 | Good growth | Cream, pasty colonies |
| Candida albicans | ATCC 10231 | ≤100 | Good growth | Cream, smooth colonies |
| Aspergillus brasiliensis | ATCC 16404 | ≤100 | Good growth | Filamentous with sporulation |
| Escherichia coli | ATCC 25922 | 10⁴–10⁶ | Reduced to no growth | Small colonies, if any |
Aspergillus brasiliensis ATCC 16404 is the current name for the organism previously listed as Aspergillus niger. The ATCC number is unchanged.
- Not a selective medium. Acid-tolerant bacteria can grow and may interfere with counting.
- Spreading moulds can cover a plate within a few days and obscure slower-growing colonies. Examine plates daily.
- Pour-plate counts are not possible with a pre-poured plate. Where your method specifies a pour-plate technique, use the dehydrated medium instead.
- Supplements cannot be added to a set plate. Where antibiotic suppression of bacteria is required, use a medium supplied with the antibiotic incorporated.
- ISO 21527-1 and ISO 21527-2 specify dichloran rose bengal chloramphenicol agar and dichloran 18% glycerol agar for yeast and mould enumeration in foods, not potato dextrose agar.
- Colony morphology is suggestive, not confirmatory.
Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.
- Atlas R.M. (2010). Handbook of Microbiological Media, 4th ed. CRC Press.
- Pitt J.I., Hocking A.D. (2009). Fungi and Food Spoilage, 3rd ed. Springer.
- Samson R.A., Houbraken J., Thrane U., Frisvad J.C., Andersen B. (2010). Food and Indoor Fungi. CBS-KNAW Fungal Biodiversity Centre.
- US Food and Drug Administration. Bacteriological Analytical Manual, Chapter 18: Yeasts, Molds and Mycotoxins.
- Salfinger Y., Tortorello M.L., eds. (2015). Compendium of Methods for the Microbiological Examination of Foods, 5th ed. APHA.
Safety Data Summary — Potato Dextrose Agar Plates
SDS-AS-700 · Rev 1.0 · November 2026 · Full 16-section SDS available on requestNot classified as hazardous according to the criteria of the GHS (Rev. 7) as adopted under the Australian WHS Regulations. No hazard pictogram or signal word is required for unused plates.
Used plates may contain viable yeasts, moulds and bacteria recovered from the sample. Fungal cultures release spores when the lid is lifted; open incubated plates in a biological safety cabinet where the sample history or the laboratory's risk assessment warrants it. Handle and dispose of used plates as biological waste.
- Use good laboratory practice. Open plates only at the time of inoculation or reading.
- Wear laboratory coat and gloves; safety glasses per laboratory policy.
- Do not sniff or inhale over incubated fungal plates.
- Skin: Wash with soap and water.
- Eyes: Rinse with water for several minutes.
- Ingestion: Rinse mouth. Seek medical advice if you feel unwell.
- Used plates: After contact, wash thoroughly and follow your laboratory biosafety procedure.
Poisons Information Centre (Australia): 13 11 26 · Emergency: 000
Store at 2–8 °C in the dark. Do not freeze. Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.
Unused plates are not dangerous goods. Transport at 2–8 °C where possible.
Quality & Certificate of Analysis
AS-700 · Batch-specific COA available on requestEach batch is manufactured in Melbourne and tested before release. A batch-specific Certificate of Analysis is available on request. Please quote the batch number printed on the sleeve.
| Test | Specification |
|---|---|
| Appearance | Light amber, clear to slightly opalescent gel, free of contamination and damage |
| Fill volume | 20 ± 1.5 mL per plate |
| pH (25 °C) | 5.6 ± 0.2 |
| Sterility | No growth after 48 h at 30–35 °C and 72 h at 20–25 °C (representative plates) |
| Growth performance | Saccharomyces cerevisiae ATCC 9763, Candida albicans ATCC 10231 and Aspergillus brasiliensis ATCC 16404: good growth at ≤100 CFU |
| Partial selectivity | Escherichia coli ATCC 25922: reduced to no growth |