AS-1453

Tributyrin Agar Base (Without Tributyrin) — AS-1453

$34.00 USD
Weight
Request a Quote
Base Medium · Lipolysis Detection

Tributyrin Agar Base

Without tributyrin — dehydrated base for preparing Tributyrin Agar, used for the detection and enumeration of lipolytic microorganisms in food and other material, including staphylococci, pseudomonads, clostridia and marine flavobacteria.

Cat. No. AS-145320 g/LpH 7.5 ± 0.2Lipolysis readoutBase medium only
Base medium only. This product is the base medium only. Tributyrin (glyceryl tributyrate) is not included and must be added by the user at 10 mL per litre and emulsified before sterilisation.

At a Glance

FormatDehydrated base
Use rate20 g/L
Tributyrin10 mL/L, not included
Sterilisation121 °C, 15 min
Incubation30–37 °C, 24–48 h
Yield (500 g)About 25 L

Intended Use

Tributyrin Agar Base is used, with added tributyrin, for the detection and enumeration of lipolytic microorganisms in food and other material. Lipolytic organisms include staphylococci, pseudomonads, clostridia and marine flavobacteria.

For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

Principle

Special peptone and yeast extract supply nitrogen, amino acids, vitamins and trace elements, supporting the growth of a wide range of organisms. Agar solidifies the medium.

Tributyrin, added by the user and emulsified into the molten medium, disperses as fine droplets that make the agar uniformly opaque. Organisms producing extracellular lipases or esterases hydrolyse the tributyrin around their colonies into butyric acid and glycerol. The emulsion is cleared locally and the result is read as a transparent halo around the colony. Non-lipolytic organisms grow without clearing the medium.

Formulation of the Base (g/L)

Ingredient g/L
Special Peptone 5.0
Yeast Extract 3.0
Agar 12.0
Total 20.0

Final pH 7.5 ± 0.2 at 37 °C. Formula may be adjusted to meet performance criteria.

Supplement Required (not included)

Supplement CAS No. Amount Function
Tributyrin (glyceryl tributyrate) 60-01-5 10 mL/L Lipid substrate; forms the opaque emulsion that lipolysis clears

Use neutral tributyrin of reagent grade. Refer to the supplier's Safety Data Sheet before use.

Incubation & Reading

Application Temperature Time Notes
Food and dairy organisms 30–37 °C 24–48 h Read clear zones against the opaque background
Slow lipolysis 30–37 °C up to 5 days Hold negative plates before reporting a negative result
Marine flavobacteria, psychrotrophs 20–25 °C 3–5 days Lower temperature for marine and chill-tolerant organisms

Positive: a clear or translucent zone around the colony — tributyrin hydrolysed. Negative: the medium stays uniformly opaque with growth but no clearing.

Key Applications

Food & Dairy LipolysisDetection and enumeration of lipolytic organisms causing rancidity in dairy products, fats and oils.
Spoilage InvestigationScreening staphylococci, pseudomonads and clostridia implicated in lipolytic spoilage.
Marine MicrobiologyDetection of lipolytic marine flavobacteria and other chill-tolerant organisms.
Enzyme ScreeningIsolation and comparison of lipase- and esterase-producing strains for industrial and research use.

Advantages & Considerations

Advantages
  • Direct visual readout; no indicator or developing reagent
  • Tributyrin added fresh, so substrate activity is not lost in storage
  • Users can vary the tributyrin concentration for their own method
  • Non-selective base supports a wide range of organisms
  • About 25 L of base from a 500 g pack
Considerations
  • Without added tributyrin the medium is a plain nutrient agar and is not differential. The base alone cannot detect lipolysis.
  • Tributyrin is a short-chain triglyceride. Organisms that hydrolyse only long-chain fats may give a weak reaction or none, and the medium detects esterase activity as well as true lipase.
  • The quality of the emulsion decides how readable the plate is. Poor emulsification gives uneven opacity that can be mistaken for zones of clearing.
  • The medium is not selective. Accompanying flora grow alongside lipolytic organisms.
  • A clear zone shows hydrolysis of tributyrin only. It does not identify the organism; confirm by biochemical or molecular methods.
  • Zone diameter depends on inoculum size, agar depth and incubation time. Compare only plates poured to the same depth in the same batch.

Comparable Products

Supplier Product Cat. No. Note
Sigma-Aldrich Tributyrin Agar 91015 Same published base formulation (20 g/L); tributyrin added separately by the user
HiMedia Tributyrin Agar Base w/o Tributyrin M157 Comparable base; agar 15 g/L and 23 g/L use rate; pH quoted at 25 °C

Catalogue numbers are listed for user reference only. Both suppliers also supply this medium as a base without tributyrin. Users should verify suitability for their own method.

Frequently Asked Questions

Is tributyrin included?
No. AS-1453 is the base medium only. Add 10 mL of tributyrin (glyceryl tributyrate, CAS 60-01-5) per litre and emulsify it before sterilising. The major suppliers also sell this medium as a base without tributyrin.

Why is tributyrin supplied separately?
Tributyrin is an oily liquid and cannot be blended into a dry powder. It is also hydrolysed slowly in storage, so a complete dehydrated product would lose activity. Adding it fresh gives a reliable emulsion every time.

When should I add the tributyrin, before or after autoclaving?
Before. Add it to the suspended base, boil to dissolve the agar, then emulsify and autoclave. Autoclaving with the tributyrin present helps produce a finer and more stable emulsion. If you prefer the alternative order, sterilise the base alone, cool it to about 80 °C and add the tributyrin with vigorous mixing.

Can I use plastic Petri dishes?
Use glass. Tributyrin can attack polystyrene, and plastic dishes may craze or cloud, which makes the zones difficult to read.

My plates look patchy rather than evenly opaque. What went wrong?
The emulsion broke or was never properly formed. Mix the medium again while it is molten at 45–50 °C and pour promptly. Patchy opacity is easily mistaken for clearing, so do not read such plates.

Does a clear zone identify the organism?
No. It shows only that the organism hydrolyses tributyrin. Many unrelated species do, and the test detects esterase as well as lipase activity. Confirm identity separately.

Technical Data Sheet — Tributyrin Agar Base

TDS-AS-1453 · Rev 1.0 · November 2026
1. Product Identification
Product name Tributyrin Agar Base (without Tributyrin)
Catalogue No. AS-1453
Product type Dehydrated base medium (tributyrin not included)
Manufacturer Ausamics Pty Ltd, Epping, VIC, Australia
Pack size 500 g
2. Intended Use

Base for Tributyrin Agar, used for the detection and enumeration of lipolytic microorganisms in food and other material, including staphylococci, pseudomonads, clostridia and marine flavobacteria. For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

3. Mode of Action

Special peptone and yeast extract supply nitrogen, amino acids, vitamins and trace elements. Tributyrin, emulsified into the molten medium by the user, disperses as fine droplets and renders the agar opaque. Extracellular lipases and esterases hydrolyse tributyrin to butyric acid and glycerol, clearing the emulsion around the colony and producing a transparent halo.

4. Formulation of the Base (g/L)
Ingredient g/L
Special Peptone 5.0
Yeast Extract 3.0
Agar 12.0
Total 20.0
5. Supplement (not included)
Supplement CAS No. Amount Function
Tributyrin (glyceryl tributyrate) 60-01-5 10 mL/L Lipid substrate; forms the opaque emulsion that lipolysis clears
6. Preparation
  1. Suspend 20 g of base in 990 mL of purified water.
  2. Add 10 mL of tributyrin (not included).
  3. Heat to boiling with constant agitation until the agar is completely dissolved.
  4. Emulsify thoroughly — homogenise or mix vigorously until the medium is uniformly opaque.
  5. Sterilise by autoclaving at 121 °C for 15 minutes.
  6. Cool to 45–50 °C, mix well to re-emulsify, and pour into sterile glass Petri dishes.

Alternative order: sterilise the base alone at 121 °C for 15 minutes, cool to about 80 °C, then add the tributyrin and emulsify immediately. Emulsifying before sterilisation generally gives a more uniform and more stable emulsion. Pour into glass Petri dishes. Tributyrin can attack polystyrene, and plastic dishes may craze or cloud, which makes zones difficult to read.

7. Incubation & Reading
Application Temperature Time Notes
Food and dairy organisms 30–37 °C 24–48 h Read clear zones against the opaque background
Slow lipolysis 30–37 °C up to 5 days Hold negative plates before reporting a negative result
Marine flavobacteria, psychrotrophs 20–25 °C 3–5 days Lower temperature for marine and chill-tolerant organisms
8. Interpretation
Positive Clear or translucent zone around the colony — tributyrin hydrolysed
Negative Medium remains uniformly opaque; growth without clearing
Uneven opacity Broken or incomplete emulsion; do not read the plate
9. Quality Control (complete medium)
Organism Strain Growth Lipolysis
Staphylococcus aureus subsp. aureus ATCC 25923 Luxuriant Clear zone (lipolysis positive)
Bacillus subtilis subsp. spizizenii ATCC 6633 Luxuriant Clear zone (lipolysis positive)
Clostridium sporogenes ATCC 11437 Luxuriant Clear zone (lipolysis positive)
Pseudomonas aeruginosa ATCC 27853 Luxuriant Clear zone (lipolysis positive)
Clostridium perfringens ATCC 12924 Luxuriant No clear zone (negative)
Escherichia coli ATCC 25922 Luxuriant No clear zone (negative)

Cultural response read after 24–48 h at 35–37 °C on medium containing 10 mL/L tributyrin.

10. Storage & Shelf Life

Dehydrated base: 15–25 °C, dry, tightly closed, protected from light. The powder is hygroscopic. Use before the expiry date on the label. Prepared plates: store below 8 °C and use within 4 weeks.

11. Limitations
  • Without added tributyrin the medium is a plain nutrient agar and is not differential. The base alone cannot detect lipolysis.
  • Tributyrin is a short-chain triglyceride. Organisms that hydrolyse only long-chain fats may give a weak reaction or none, and the medium detects esterase activity as well as true lipase.
  • The quality of the emulsion decides how readable the plate is. Poor emulsification gives uneven opacity that can be mistaken for zones of clearing.
  • The medium is not selective. Accompanying flora grow alongside lipolytic organisms.
  • A clear zone shows hydrolysis of tributyrin only. It does not identify the organism; confirm by biochemical or molecular methods.
  • Zone diameter depends on inoculum size, agar depth and incubation time. Compare only plates poured to the same depth in the same batch.
12. References
  1. Collins C.H., Lyne P.M., Grange J.M. (1989). Collins and Lyne's Microbiological Methods, 6th ed. Butterworths, London.
  2. Jones A., Richards T. (1952). Tributyrin agar as a medium for the detection of lipolytic organisms. J. Appl. Bacteriol. 15:xii.
  3. Harrigan W.F. (1998). Laboratory Methods in Food Microbiology, 3rd ed. Academic Press, San Diego.
  4. Salfinger Y., Tortorello M.L. (eds) (2015). Compendium of Methods for the Microbiological Examination of Foods, 5th ed. APHA, Washington DC.
  5. Atlas R.M. (2010). Handbook of Microbiological Media, 4th ed. CRC Press, Boca Raton.

Safety Data Summary — Tributyrin Agar Base

SDS-AS-1453 · Rev 1.0 · November 2026 · Full 16-section SDS available on request
Hazard Classification

The base medium is not classified as hazardous according to the GHS (Rev. 7) as adopted under the Australian WHS Regulations. No signal word, pictogram or hazard statement is required.

Important: tributyrin, which the user adds to prepare the complete medium, is a separate chemical with its own hazards. Refer to the tributyrin supplier's Safety Data Sheet before use.

Handling & Protection
  • Avoid creating and breathing dust. Use with adequate ventilation.
  • Wear laboratory coat, gloves and safety glasses.
  • Wash hands after handling.
First Aid
  • Inhalation: Move to fresh air.
  • Skin: Wash with soap and water.
  • Eyes: Rinse with water for several minutes. Seek medical advice if irritation persists.
  • Ingestion: Rinse mouth. Seek medical advice if you feel unwell.

Poisons Information Centre (Australia): 13 11 26 · Emergency: 000

Biosafety & Disposal

Inoculated plates may carry Risk Group 2 organisms. Handle under PC2 conditions and autoclave before disposal.

Transport

Not regulated as dangerous goods for road (ADG), sea (IMDG) or air (IATA) transport.

Quality & Certificate of Analysis

AS-1453 · Batch-specific COA available on request

Each batch of Tributyrin Agar Base is manufactured in Melbourne and tested internally before release. A batch-specific Certificate of Analysis is available on request. Please quote the batch number printed on the label.

Release Specifications
Test Specification
Appearance (powder) Cream to light beige, homogeneous, free-flowing
Appearance (prepared base) Light amber, clear to slightly opalescent gel
Appearance (complete medium) Uniformly opaque white emulsion
Gel strength Firm, comparable gel
pH at 37 °C (20 g/L) 7.3 – 7.7
Lipolysis: S. aureus ATCC 25923 Luxuriant growth; clear zone (complete medium)
Lipolysis: E. coli ATCC 25922 Luxuriant growth; no clear zone (complete medium)

CUSTOMERS ALSO BOUGHT