AS-701

Tryptic Soy Agar (TSA) Plates, 90 mm Ready-to-Use

$25.00 AUD ex GST
Pack
Request a Quote
Ready-to-use Plates · General Purpose Medium

Tryptic Soy Agar (TSA) Plates

Ready-to-use 90 mm tryptic soy agar plates for total aerobic microbial count, environmental monitoring and general-purpose cultivation of bacteria and fungi.

Cat. No. AS-70190 mm · 20 mLpH 7.3 ± 0.2Ready to useTotal aerobic count
No preparation needed: plates are poured, sealed and ready to use. Inoculate, incubate and count.

What Grows

Aerobic bacteriaGood growth
Many fastidious speciesSupported
Yeasts and mouldsGrowth
Incubation30–35 °C

Intended Use

Ready-to-use 90 mm tryptic soy agar plates for determining the total aerobic microbial count, for environmental and personnel monitoring, and for the general cultivation, subculture and purity checking of a wide range of bacteria and fungi.

For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

Principle

The medium takes its nutrients from two protein digests that complement each other. The pancreatic digest of casein is rich in amino acids, including tryptophan, and provides most of the nitrogen. The papaic digest of soybean meal adds carbohydrates, vitamins and growth factors that the casein digest lacks.

Neither digest alone supports as broad a range of organisms as the two together, and that breadth is the whole point of the medium. Sodium chloride maintains osmotic balance, and agar sets the gel.

There is no selective agent and no indicator. Everything that can grow aerobically at the incubation temperature will grow, which is what makes the medium suitable for a total count and unsuitable for isolating a particular organism from a mixed sample.

Formulation (g/L)

Component g/L
Pancreatic digest of casein 15.00
Agar 15.00
Papaic digest of soybean meal 5.00
Sodium chloride 5.00
Total 40.00

Final pH 7.3 ± 0.2 at 25 °C. Formulation may be adjusted to meet performance specifications.

Key Applications

Total Aerobic CountMicrobial enumeration of raw materials, product and water.
Environmental MonitoringSettle-plate exposure in cleanrooms and production areas.
Personnel MonitoringGlove-print and garment checks in controlled environments.
Culture MaintenanceSubculture, purity checks and working stocks of most routine strains.
Growth Promotion TestingControl plates for method suitability and media comparison work.
TeachingGeneral microbiology practicals and colony-morphology exercises.

Reading the Results

Organism group Typical appearance
Most aerobic bacteria Opaque cream to white colonies, 1–3 mm; some species pigmented
Yeasts Cream, pasty, convex colonies
Moulds Filamentous and spreading, developing aerial mycelium

Count all colonies and report as CFU per mL or CFU per g using the dilution factor, or as CFU per plate for settle plates. The medium gives no differential reaction, so colour and morphology indicate the type of organism but do not identify it.

Advantages & Considerations

Advantages
  • Ready to use: no weighing, autoclaving or pouring
  • The broadest-growth general-purpose agar in routine use
  • Supports bacteria and fungi on a single plate
  • The medium named in the major pharmacopoeial enumeration chapters, so results are comparable between laboratories
Considerations
  • Entirely non-selective. Every aerobic organism present will grow, so a mixed sample gives a mixed plate.
  • No neutralisers in the formulation. Residual disinfectant on a sampled surface may reduce recovery.
  • Pour-plate counts are not possible with a pre-poured plate. Use surface spread or streak inoculation.
  • Not suitable for strict anaerobes without an anaerobic incubation system, and not enriched for the most demanding species.

Related Standards (for user reference)

  • USP <61> — Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests (Soybean–Casein Digest Agar)
  • USP <62> — Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms
  • European Pharmacopoeia 2.6.12 and 2.6.13 — Microbiological examination of non-sterile products (Casein Soya Bean Digest Agar)
  • ISO 14698-1 — Cleanrooms and associated controlled environments: biocontamination control

Frequently Asked Questions

Is Tryptic Soy Agar the same as Soybean-Casein Digest Agar?
Yes. Tryptic Soy Agar, Trypticase Soy Agar, Soybean-Casein Digest Agar and Casein Soya Bean Digest Agar are all names for the same formulation. The pharmacopoeias use the Soybean-Casein Digest name.

Do these plates contain disinfectant neutralisers?
No. This is plain Tryptic Soy Agar with no lecithin or polysorbate 80. If you sample surfaces after disinfection, residual disinfectant may reduce recovery and a neutralising formulation is required instead.

Can I count yeasts and moulds on the same plate?
The medium supports both bacteria and fungi, which is why the pharmacopoeial enumeration methods use it for total aerobic count. Where a separate fungal count is required, a dedicated mycological medium incubated at a lower temperature gives better recovery and clearer colonies.

Can I do a pour-plate count with these plates?
No. A pour-plate count requires mixing the sample into molten agar, which is not possible with a plate that has already set. Use surface spread or streak inoculation, or use the dehydrated medium if your method specifies a pour plate.

What incubation temperature should I use?
30–35 °C for 3 to 5 days is the usual range for a total aerobic count. Lower temperatures and longer incubation favour fungi and environmental organisms, so follow the temperature your method specifies rather than changing it between batches.

Technical Data Sheet — Tryptic Soy Agar (TSA) Plates

TDS-AS-701 · Rev 1.0 · November 2026
1. Intended Use

Ready-to-use 90 mm tryptic soy agar plates for determining the total aerobic microbial count, for environmental and personnel monitoring, and for general cultivation, subculture and purity checking. For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

2. Mode of Action

Pancreatic digest of casein supplies amino acids and nitrogen; papaic digest of soybean meal adds carbohydrates, vitamins and growth factors that the casein digest lacks. Together the two digests support a wider range of organisms than either alone, including a number of fastidious species. Sodium chloride maintains osmotic balance. The medium contains no selective agent and no indicator system.

3. Formulation (g/L)
Component g/L
Pancreatic digest of casein 15.00
Agar 15.00
Papaic digest of soybean meal 5.00
Sodium chloride 5.00
Total 40.00
4. Product Specifications
Format Ready-to-use poured plates, 90 mm, flat agar surface
Fill volume 20 ± 1.5 mL per plate
Pack size 10 plates per sleeve (as stated on label)
Storage 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze.
Shipping conditions Chilled, insulated carton with coolant packs; plates separated from the coolant
Dispatch Mondays, to avoid weekend transit
Shelf life 6 weeks from date of manufacture; expiry stated on label
pH (25 °C) 7.3 ± 0.2
Appearance Light amber, clear to slightly opalescent gel
5. Directions for Use
  1. Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
  2. If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
  3. Spread plate: pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
  4. Streak plate: inoculate with a sterile loop for isolation or purity checking.
  5. Settle plate: expose the open plate for the period your procedure specifies. Personnel: press gloved fingertips gently onto the agar.
  6. Incubate inverted, then count all colonies.

Incubation: 30–35 °C, 3–5 days, aerobic. Follow the temperature and duration specified by your method.

6. Interpretation
Organism group Typical appearance
Most aerobic bacteria Opaque cream to white colonies, 1–3 mm; some species pigmented
Yeasts Cream, pasty, convex colonies
Moulds Filamentous and spreading, developing aerial mycelium

Report as CFU per mL or CFU per g using the dilution factor, or as CFU per plate for settle plates. The medium gives no differential reaction; identify isolates by subculture and appropriate confirmatory testing.

7. Quality Control
Organism Strain Inoculum (CFU) Growth
Staphylococcus aureus ATCC 6538 ≤100 Good growth
Bacillus subtilis ATCC 6633 ≤100 Good growth
Pseudomonas aeruginosa ATCC 9027 ≤100 Good growth
Escherichia coli ATCC 8739 ≤100 Good growth
Candida albicans ATCC 10231 ≤100 Good growth
Aspergillus brasiliensis ATCC 16404 ≤100 Good growth

The panel above comprises the strains used for growth promotion testing in the pharmacopoeial microbial enumeration methods. Aspergillus brasiliensis ATCC 16404 is the current name for the organism previously listed as Aspergillus niger.

8. Limitations
  • Entirely non-selective. Every aerobic organism present will grow, so a mixed sample gives a mixed plate and a single organism cannot be isolated from it without a selective medium.
  • The formulation contains no disinfectant neutralisers. Residual disinfectant on sampled surfaces may reduce recovery.
  • Pour-plate counts are not possible with a pre-poured plate. Where your method specifies a pour-plate technique, use the dehydrated medium instead.
  • Not suitable for strict anaerobes without an anaerobic incubation system.
  • Not enriched with blood or other supplements, so the most demanding species may not grow.
  • Fungal overgrowth can obscure bacterial colonies on extended incubation.
  • Growth does not identify an organism.
9. Disposal

Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.

10. References
  1. Atlas R.M. (2010). Handbook of Microbiological Media, 4th ed. CRC Press.
  2. Difco & BBL Manual: Manual of Microbiological Culture Media, 2nd ed. (2009). BD Diagnostics.
  3. United States Pharmacopeia, General Chapter <61>: Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests.
  4. European Pharmacopoeia, chapter 2.6.12: Microbiological examination of non-sterile products: microbial enumeration tests.
  5. Sandle T. (2016). Pharmaceutical Microbiology: Essentials for Quality Assurance and Quality Control. Woodhead Publishing.

Safety Data Summary — Tryptic Soy Agar (TSA) Plates

SDS-AS-701 · Rev 1.0 · November 2026 · Full 16-section SDS available on request
Hazard Classification

Not classified as hazardous according to the criteria of the GHS (Rev. 7) as adopted under the Australian WHS Regulations. No hazard pictogram or signal word is required for unused plates.

Contains casein-derived and soy-derived material. People with milk protein or soy allergy should avoid exposure.

Biosafety

Because the medium is non-selective, used plates may carry a higher and more varied microbial load than a selective medium would, including organisms not anticipated when the sample was taken. Treat incubated plates as potentially infectious, open them in a biological safety cabinet where the laboratory's risk assessment requires it, and dispose of them as biological waste.

Handling & Protection
  • Use good laboratory practice. Open plates only at the time of inoculation or reading.
  • Wear laboratory coat and gloves; safety glasses per laboratory policy.
First Aid
  • Skin: Wash with soap and water.
  • Eyes: Rinse with water for several minutes.
  • Ingestion: Rinse mouth. Seek medical advice if you feel unwell.
  • Used plates: After contact, wash thoroughly and follow your laboratory biosafety procedure.

Poisons Information Centre (Australia): 13 11 26 · Emergency: 000

Storage & Disposal

Store at 2–8 °C in the dark. Do not freeze. Used plates contain viable microorganisms. Autoclave (121 °C, at least 15 minutes) or incinerate. If neither is possible, flood plates with 5–10 % bleach, leave overnight, then discard according to local regulations.

Transport

Unused plates are not dangerous goods. Transport at 2–8 °C where possible.

Quality & Certificate of Analysis

AS-701 · Batch-specific COA available on request

Each batch is manufactured in Melbourne and tested before release. A batch-specific Certificate of Analysis is available on request. Please quote the batch number printed on the sleeve.

Release Specifications
Test Specification
Appearance Light amber, clear to slightly opalescent gel, free of contamination and damage
Fill volume 20 ± 1.5 mL per plate
pH (25 °C) 7.3 ± 0.2
Sterility No growth after 48 h at 30–35 °C and 72 h at 20–25 °C (representative plates)
Growth performance Staphylococcus aureus ATCC 6538, Bacillus subtilis ATCC 6633, Pseudomonas aeruginosa ATCC 9027, Escherichia coli ATCC 8739, Candida albicans ATCC 10231 and Aspergillus brasiliensis ATCC 16404: good growth at ≤100 CFU

CUSTOMERS ALSO BOUGHT