AS-702

YGC Agar Plates, 90 mm Ready-to-Use

$55.00 AUD ex GST
Pack
Request a Quote
Ready-to-use Plates · Selective Mycological Medium

YGC Agar Plates

Ready-to-use 90 mm yeast extract glucose chloramphenicol agar plates for the selective enumeration of yeasts and moulds in milk, dairy products and foods.

Cat. No. AS-70290 mm · 20 mLpH 6.6 ± 0.2Ready to useContains chloramphenicol
No preparation needed: plates are poured, sealed and ready to use, with the antibiotic already incorporated.

What Grows

YeastsGood growth
MouldsGood growth
BacteriaSuppressed
Incubation25 °C

Intended Use

Ready-to-use 90 mm yeast extract glucose chloramphenicol agar plates for the selective enumeration of yeasts and moulds in milk and milk products, and in other foods and beverages where the accompanying bacterial flora must be suppressed.

For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

Principle

Yeast extract supplies nitrogen, B vitamins and the growth factors fungi need. Glucose at 20 g/L is the carbon and energy source, and the high sugar concentration favours osmotolerant yeasts and moulds.

Chloramphenicol at 0.1 g/L does the selecting. It is a broad-spectrum antibiotic that suppresses the accompanying bacterial flora, leaving the fungi to grow and be counted without interference.

That matters because of what it allows the pH to be. Most selective mycological media achieve selectivity by acidifying to around pH 3.5 to 5.6, and acid-sensitive yeasts are under stress on such a medium and may be undercounted. Because the antibiotic carries the selectivity here, the medium sits at a near-neutral pH 6.6, and fungal recovery is correspondingly better.

Formulation (g/L)

Component g/L
Glucose 20.00
Agar 14.90
Yeast extract 5.00
Chloramphenicol 0.10
Total 40.00

Selective agent shown in amber. Final pH 6.6 ± 0.2 at 25 °C. Formulation corresponds to the composition published in ISO 6611 / IDF 94. Formulation may be adjusted to meet performance specifications.

Key Applications

DairyYeast and mould counts in milk, cheese, yoghurt, butter and milk powder.
Food & BeverageSpoilage fungi in juices, concentrates, confectionery and bakery products.
Raw MaterialsIncoming-goods screening of ingredients with a high bacterial background.
Shelf-life StudiesFungal load through storage trials and challenge testing.
EnvironmentalSettle-plate exposure where a fungal count is needed without bacteria.
CosmeticsFungal screening of raw materials and finished product.

Reading the Results

Organism group Typical appearance
Yeasts Cream to white, smooth, pasty, convex colonies, usually 1–3 mm
Moulds Filamentous, spreading, with aerial mycelium; colour varies by genus as spores develop
Bacteria Suppressed. Colonies that appear are likely chloramphenicol-resistant.

Count yeast and mould colonies, separately where your method requires it, and report as CFU per mL or CFU per g using the dilution factor.

Advantages & Considerations

Advantages
  • Ready to use, with the antibiotic already incorporated and no supplement to add
  • Antibiotic selectivity gives visibly cleaner plates than an acidified medium on a bacteria-rich sample
  • Near-neutral pH 6.6 recovers acid-sensitive yeasts that an acidified medium can undercount
  • Formulation corresponds to the composition published in ISO 6611 / IDF 94 for milk and milk products
Considerations
  • Contains chloramphenicol. Users with a known sensitivity should avoid handling the plates, and used plates need a waste route that accepts antibiotic-containing material.
  • Chloramphenicol-resistant bacteria can grow and may be miscounted as yeasts if colonies are read by size alone.
  • Pour-plate counts are not possible with a pre-poured plate. ISO 6611 permits a surface-spread technique, which these plates support.
  • Spreading moulds can cover a plate and obscure slower colonies. Examine plates daily rather than only at the end point.

Related Standards (for user reference)

  • ISO 6611:2004 / IDF 94:2004 — Milk and milk products: enumeration of colony-forming units of yeasts and/or moulds
  • APHA Standard Methods for the Examination of Dairy Products — fungal enumeration chapters

Frequently Asked Questions

How does YGC Agar differ from Potato Dextrose Agar?
YGC Agar suppresses bacteria with chloramphenicol at a near-neutral pH of 6.6, while Potato Dextrose Agar relies on an acidic pH of 5.6. The antibiotic gives cleaner plates, and the higher pH recovers acid-sensitive yeasts that an acidified medium can miss.

Can I do a pour-plate count with these plates?
No. A pour-plate count requires mixing the sample into molten agar, which is not possible with a plate that has already set. ISO 6611 permits a surface-spread technique, which these plates support. If your procedure specifies the pour-plate option, use the dehydrated medium instead.

What does the chloramphenicol in the medium mean for handling?
The plates contain chloramphenicol at 0.1 g/L. The finished plate is not classified as hazardous, but anyone with a known chloramphenicol sensitivity should avoid handling it, and used plates should go to a waste stream that accepts antibiotic-containing material.

Why is a bacterial count not possible on this medium?
Chloramphenicol is a broad-spectrum antibiotic that suppresses the accompanying bacterial flora, which is the point of the medium. Bacteria that do appear are likely to be chloramphenicol-resistant and are not representative of the bacterial population in the sample.

How long should I incubate?
Commonly 5 days at 25 °C for dairy work, read at 3 and 5 days. Examine the plates at each reading, since a fast mould can overgrow the plate before the final count.

Technical Data Sheet — YGC Agar Plates

TDS-AS-702 · Rev 1.0 · November 2026
1. Intended Use

Ready-to-use 90 mm yeast extract glucose chloramphenicol agar plates for the selective enumeration of yeasts and moulds in milk and milk products, and in other foods and beverages where the accompanying bacterial flora must be suppressed. For laboratory microbiological testing, quality control and research use only. Not intended for direct use in food, human or veterinary therapeutic applications, diagnosis, or consumption.

2. Mode of Action

Yeast extract supplies nitrogen, B vitamins and growth factors; glucose at 20 g/L is the carbon and energy source and favours osmotolerant fungi. Chloramphenicol at 0.1 g/L suppresses the accompanying bacterial flora. Because selectivity comes from the antibiotic rather than from acidification, the medium is held at a near-neutral pH 6.6, which gives better recovery of acid-sensitive yeasts than an acidified mycological medium.

3. Formulation (g/L)
Component g/L
Glucose 20.00
Agar 14.90
Yeast extract 5.00
Chloramphenicol 0.10
Total 40.00

Formulation corresponds to the composition published in ISO 6611 / IDF 94.

4. Product Specifications
Format Ready-to-use poured plates, 90 mm, flat agar surface
Fill volume 20 ± 1.5 mL per plate
Pack size 10 plates per sleeve (as stated on label)
Storage 2–8 °C, in the dark, in the original sleeve, agar side up. Do not freeze.
Shipping conditions Chilled, insulated carton with coolant packs; plates separated from the coolant
Dispatch Mondays, to avoid weekend transit
Shelf life 6 weeks from date of manufacture; expiry stated on label
pH (25 °C) 6.6 ± 0.2
Appearance Light amber, clear to slightly opalescent gel
Selective agent Chloramphenicol, 0.1 g/L
5. Directions for Use
  1. Bring plates to room temperature. Discard any plate showing contamination, cracking, shrinkage or condensation on the agar.
  2. If the surface is moist, dry it with the lid ajar in a laminar flow cabinet before inoculating.
  3. Pipette 0.1 mL of sample or dilution onto the surface and spread with a sterile spreader until absorbed.
  4. For dairy samples, follow the dilution scheme and plating volume specified in your method.
  5. Incubate inverted at 25 °C.
  6. Examine at 3 days and count at 5 days, recording yeasts and moulds separately where required.

Incubation: 25 °C, 5 days, aerobic.

6. Interpretation
Organism group Typical appearance
Yeasts Cream to white, smooth, pasty, convex colonies, usually 1–3 mm
Moulds Filamentous, spreading, with aerial mycelium; colour varies by genus as spores develop
Bacteria Suppressed. Colonies that appear are likely chloramphenicol-resistant.

Report as CFU per mL or CFU per g using the dilution factor. Where yeast and mould counts are reported separately, distinguish them by colony morphology and confirm by microscopy if the distinction is unclear. Growth does not identify an organism.

7. Quality Control
Organism Strain Inoculum (CFU) Growth Appearance
Saccharomyces cerevisiae ATCC 9763 ≤100 Good growth Cream, pasty colonies
Candida albicans ATCC 10231 ≤100 Good growth Cream, smooth colonies
Aspergillus brasiliensis ATCC 16404 ≤100 Good growth Filamentous with sporulation
Escherichia coli ATCC 25922 10⁴–10⁶ Partial to complete inhibition Colourless, if any
Bacillus subtilis ATCC 6633 10⁴–10⁶ Partial to complete inhibition Colourless, if any

Aspergillus brasiliensis ATCC 16404 is the current name for the organism previously listed as Aspergillus niger. The ATCC number is unchanged.

8. Limitations
  • Contains chloramphenicol. Users with a known sensitivity should avoid handling the plates, and used plates require a waste route that accepts antibiotic-containing material.
  • Chloramphenicol-resistant bacteria can grow and may be miscounted as yeasts if colonies are judged by size alone.
  • Pour-plate counts are not possible with a pre-poured plate. Where the pour-plate option in your method is used, prepare the medium from the dehydrated form instead.
  • Spreading moulds can obscure slower-growing colonies. Examine plates at each reading point.
  • The medium does not differentiate yeasts from moulds other than by colony morphology.
  • Not suitable for enumerating bacteria, by design.
9. Disposal

Used plates contain viable microorganisms and residual chloramphenicol. Autoclave (121 °C, at least 15 minutes) or incinerate, and route the decontaminated waste to a stream that accepts antibiotic-containing material in accordance with local regulations.

10. References
  1. ISO 6611:2004 / IDF 94:2004. Milk and milk products — Enumeration of colony-forming units of yeasts and/or moulds — Colony-count technique at 25 degrees C.
  2. Atlas R.M. (2010). Handbook of Microbiological Media, 4th ed. CRC Press.
  3. Pitt J.I., Hocking A.D. (2009). Fungi and Food Spoilage, 3rd ed. Springer.
  4. Wehr H.M., Frank J.F., eds. (2004). Standard Methods for the Examination of Dairy Products, 17th ed. APHA.
  5. Beuchat L.R. (1992). Media for detecting and enumerating yeasts and moulds. Int. J. Food Microbiol. 17:145–158.

Safety Data Summary — YGC Agar Plates

SDS-AS-702 · Rev 1.0 · November 2026 · Full 16-section SDS available on request
Hazard Classification

Not classified as hazardous according to the criteria of the GHS (Rev. 7) as adopted under the Australian WHS Regulations. No hazard pictogram or signal word is required for unused plates.

Chloramphenicol Content

The plates contain chloramphenicol at 0.1 g/L, equivalent to approximately 0.01 % w/w in the finished gel. Chloramphenicol as a pure substance carries a health hazard classification, but at this concentration the finished plate falls below the generic concentration limit at which that classification applies to a mixture, so the plate itself is not classified.

Two practical consequences follow. Anyone with a known chloramphenicol sensitivity or allergy should avoid handling these plates. And used plates carry residual antibiotic, so after decontamination they should go to a waste stream that accepts antibiotic-containing material rather than to general waste.

Biosafety

Used plates may contain viable yeasts and moulds recovered from the sample. Fungal cultures release spores when the lid is lifted; open incubated plates in a biological safety cabinet where the sample history or the laboratory's risk assessment warrants it. Handle and dispose of used plates as biological waste.

Handling & Protection
  • Use good laboratory practice. Open plates only at the time of inoculation or reading.
  • Wear laboratory coat and gloves; safety glasses per laboratory policy.
  • Do not sniff or inhale over incubated fungal plates.
First Aid
  • Skin: Wash with soap and water. Seek medical advice if you have a known chloramphenicol sensitivity.
  • Eyes: Rinse with water for several minutes.
  • Ingestion: Rinse mouth. Seek medical advice if you feel unwell.
  • Used plates: After contact, wash thoroughly and follow your laboratory biosafety procedure.

Poisons Information Centre (Australia): 13 11 26 · Emergency: 000

Storage & Disposal

Store at 2–8 °C in the dark. Do not freeze. Used plates contain viable microorganisms and residual chloramphenicol. Autoclave (121 °C, at least 15 minutes) or incinerate, then discard to a waste stream that accepts antibiotic-containing material in accordance with local regulations.

Transport

Unused plates are not dangerous goods. Transport at 2–8 °C where possible.

Quality & Certificate of Analysis

AS-702 · Batch-specific COA available on request

Each batch is manufactured in Melbourne and tested before release. A batch-specific Certificate of Analysis is available on request. Please quote the batch number printed on the sleeve.

Release Specifications
Test Specification
Appearance Light amber, clear to slightly opalescent gel, free of contamination and damage
Fill volume 20 ± 1.5 mL per plate
pH (25 °C) 6.6 ± 0.2
Sterility No growth after 48 h at 30–35 °C and 72 h at 20–25 °C (representative plates)
Growth performance Saccharomyces cerevisiae ATCC 9763, Candida albicans ATCC 10231 and Aspergillus brasiliensis ATCC 16404: good growth at ≤100 CFU
Selectivity Escherichia coli ATCC 25922 and Bacillus subtilis ATCC 6633: partial to complete inhibition

CUSTOMERS ALSO BOUGHT